Skip to content

installation.md

Latest commit

 

History

History
130 lines (84 loc) · 5.4 KB

installation.md

File metadata and controls

130 lines (84 loc) · 5.4 KB

Installation

Introduction

'cdpfgl' is a set of programs that will save your files while being created and written to your disks. It will save your files from a client machine (containing the files to be saved) to a server machine (that will contain all the saved files and informations about thoses files). It will allow you to restore the saved files at their latest version or at any older versions.

Getting cdpfgl

You can get sauvegarde downloading a specific release from http://cdpfgl.delhomme.org/download/releases/ or by cloning the github repository.

Cloning from github

Use the following command to clone cdpfgl's git repository:

$ git clone https://github.com/dupgit/sauvegarde.git
Cloning into 'sauvegarde'...
remote: Counting objects: 4369, done.
remote: Compressing objects: 100% (59/59), done.
remote: Total 4369 (delta 21), reused 0 (delta 0), pack-reused 4303
Receiving objects: 100% (4369/4369), 1.48 MiB | 779.00 KiB/s, done.
Resolving deltas: 100% (3347/3347), done.
Checking connectivity... done.

When git is done you have to generate the configure script that we will use to install the project. First make sure that you have installed autotools, automake, autoconf, libtool, and intltool.

$ ./autogen.sh
libtoolize: putting auxiliary files in `.'.
libtoolize: linking file `./ltmain.sh'
configure.ac:6: installing './compile'
configure.ac:67: installing './config.guess'
configure.ac:67: installing './config.sub'
configure.ac:4: installing './install-sh'
configure.ac:4: installing './missing'
libsauvegarde/Makefile.am: installing './depcomp'
Copying file po/Makefile.in.in

Please add the files
  codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
  progtest.m4
from the /usr/share/aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.


You can now run ./configure

Downloading a tar.[xg]z

Download the latest release version from http://cdpfgl.delhomme.org/download/releases/ for instance v0.0.8 and decompress it:

$ wget -c http://cdpfgl.delhomme.org/download/releases/cdpfgl-0.0.8.tar.xz
--2015-09-13 14:16:55--  http://cdpfgl.delhomme.org/download/releases/cdpfgl-0.0.8.tar.xz
Résolution de cdpfgl.delhomme.org (cdpfgl.delhomme.org)… 62.210.16.61
Connexion à cdpfgl.delhomme.org (cdpfgl.delhomme.org)|62.210.16.61|:80… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 296280 (289K) [application/x-tar]
Sauvegarde en : « cdpfgl-0.0.8.tar.xz »

cdpfgl-0.0.8.tar.xz                                    100%[=========================================================================================================================================>] 289,34K   659KB/s   ds 0,4s

2015-09-13 14:16:55 (659 KB/s) — « cdpfgl-0.0.8.tar.xz » sauvegardé [296280/296280]
$ tar Jxf cdpfgl-0.0.8.tar.xz
$ cd cdpfgl-0.0.8

Before using the configure script to install cdpfgl you'll have to install all dependencies. If you forgot a dependency the configure script will tell you and fail!

Installing dependencies

You'll have to install the dependencies in order to be able to compile cdpfgl's project. Some dependencies are fine to be installed with the system's package manager some are too old and needs to be installed manually. In this section we will install everything to /usr/local. Consider your own case to choose the right installation directory. Make sure that you already have installed make and gcc (on debian you can install build-essential package).

Install dependencies from the distribution (here with debian):

$ sudo apt-get install gettext pkg-config libglib2.0-dev libcurl4-openssl-dev

Compile and install newer versions of jansson, libmicrohttpd and sqlite:

cdpfgl project uses:

  • jansson which is a C JSON library that provides the structure to send data and receive data (and meta data) from the other programs.
  • libmicrohttp provides the HTTP layer to cdpfglserver : when cdpfglserver is launched direct your favorite web browser to http://host_where_running:5468/Version or /Version.json
  • sqlite that helps cdpfglclient to keep what has been done in order to avoid doing thing more than once !

jansson

$ git clone git://github.com/akheron/jansson.git
$ cd jansson
$ autoreconf -f -i
$ CFLAGS=-Werror ./configure --prefix=/usr/local
$ make
$ sudo make install

libmicrohttpd

$ wget --quiet -c http://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.46.tar.gz
$ tar zxf libmicrohttpd-0.9.46.tar.gz
$ cd libmicrohttpd-0.9.46
$ ./configure --prefix=/usr/local
$ make
$ sudo make install

sqlite

$ wget --quiet -c https://www.sqlite.org/2015/sqlite-autoconf-3090100.tar.gz
$ tar zxf sqlite-autoconf-3090100.tar.gz
$ cd sqlite-autoconf-3090100
$ ./configure --prefix=/usr/local
$ make
$ sudo make install

Compiling and installing cdpfgl

Go to the directory where you extracted cdpfgl (either from github or from a tar.xz file) and then use the configure script :

$ ./configure --prefix=/usr/local
$ make
$ sudo make install

Here you are. Now you should be able to invoke cdpfglclient --version or cdpfglrestore --help (those two options works also with cdpfglserver).